LevelOne FGL-2870 - Manual (Page 765)

Domain Name Service Commands
4-399
4
Domain Name Service Commands
These commands are used to configure Domain Naming System (DNS) services.
Entries can be manually configured in the DNS domain name to IP address mapping
table, default domain names configured, or one or more name servers specified to
use for domain name to address translation.
Note that domain name services will not be enabled until at least one name server is
specified with the ip name-server command and domain lookup is enabled with the
ip domain-lookup command.
ip host
This command creates a static entry in the DNS table that maps a host name to an
IP address. Use the no form to remove an entry.
Syntax
[no] ip host name address1 [address2 … address8]
• name - Name of the host. (Range: 1-64 characters)
• address1 - Corresponding IP address.
• address2 … address8 - Additional corresponding IP addresses.
Table 4-99 show mvr receiver members - display description
Field Description
MVR Group IP Multicast groups assigned to the MVR Receiver VLAN.
Status Shows whether or not the there are active subscribers for this multicast group. Note that
this field will also display “ACTIVE” if an interface has been statically assigned to a group.
Members Shows the interfaces with subscribers for multicast services provided through the MVR
Receiver VLAN. Also shows if an interface has dynamically joined a multicast group (d),
or if a multicast group has been statically bound to the interface (s).
Table 4-100 DNS Commands
Command Function Mode Page
ip host Creates a static host name-to-address mapping GC 4-399
clear host Deletes entries from the host name-to-address table PE 4-400
ip domain-name Defines a default domain name for incomplete host names GC 4-401
ip domain-list Defines a list of default domain names for incomplete host names GC 4-401
ip name-server Specifies the address of one or more name servers to use for host
name-to-address translation
GC 4-402
ip domain-lookup Enables DNS-based host name-to-address translation GC 4-403
show hosts Displays the static host name-to-address mapping table PE 4-404
show dns Displays the configuration for DNS services PE 4-404
show dns cache Displays entries in the DNS cache PE 4-405
clear dns cache Clears all entries from the DNS cache PE 4-405