LevelOne FGL-2870 - Manual (Page 608)

Command Line Interface
4-242
4
auto-traffic-control auto-control-release
This command automatically releases a control response after the time specified in
the auto-traffic-control release-timer command (page 4-237) has expired.
Syntax
auto-traffic-control {broadcast | multicast} auto-control-release
• broadcast - Specifies automatic storm control for broadcast traffic.
• multicast - Specifies automatic storm control for multicast traffic.
Command Mode
Interface Configuration (Ethernet)
Command Usage
This command can be used to automatically stop a control response after the
specified action has been triggered and the release timer has expired.
Example
snmp-server enable port-traps atc broadcast-alarm-fire
This command sends a trap when broadcast traffic exceeds the upper threshold for
automatic storm control. Use the no form to disable this trap.
Syntax
[no] snmp-server enable port-traps atc broadcast-alarm-fire
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Related Commands
auto-traffic-control alarm-fire-threshold (4-238)
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast auto-control-release
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc broadcast-alarm-fire
Console(config-if)#