LevelOne FGL-2870 - Manual (Page 536)

Command Line Interface
4-170
4
clear network-access
Use this command to clear entries from the secure MAC addresses table.
Syntax
clear network-access mac-address-table [static | dynamic]
[address mac-address] [interface interface]
• static - Specifies static address entries.
• dynamic - Specifies dynamic address entries.
• mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-xx-xx-xx)
• interface - Specifies a port interface.
ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-28/52)
Default Setting
None
Command Mode
Privileged Exec
Example
show network-access
Use this command to display the MAC authentication settings for port interfaces.
Syntax
show network-access [interface interface]
interface - Specifies a port interface.
ethernet unit/port
• unit - This is unit 1.
• port - Port number. (Range: 1-28/52)
Default Setting
Displays the settings for all interfaces.
Command Mode
Privileged Exec
Console#clear network-access mac-address-table interface ethernet 1/1
Console#