LevelOne FGL-2870 - Manual (Page 702)

Command Line Interface
4-336
4
* Vendor-specific options may or may not be advertised by neighboring devices.
lldp basic-tlv
system-name
Configures an LLDP-enabled port to advertise its system
name
IC 4-345
lldp dot1-tlv
proto-ident*
Configures an LLDP-enabled port to advertise the supported
protocols
IC 4-345
lldp dot1-tlv
proto-vid*
Configures an LLDP-enabled port to advertise port related
VLAN information
IC 4-346
lldp dot1-tlv
pvid*
Configures an LLDP-enabled port to advertise its default
VLAN ID
IC 4-346
lldp dot1-tlv
vlan-name*
Configures an LLDP-enabled port to advertise its VLAN
name
IC 4-347
lldp dot3-tlv
link-agg
Configures an LLDP-enabled port to advertise its link
aggregation capabilities
IC 4-347
lldp dot3-tlv
mac-phy
Configures an LLDP-enabled port to advertise its MAC and
physical layer specifications
IC 4-348
lldp dot3-tlv
max-frame
Configures an LLDP-enabled port to advertise its maximum
frame size
IC 4-348
lldp dot3-tlv
poe
Configures an LLDP-enabled port to advertise its
Power-over-Ethernet capabilities
IC 4-349
lldp medtlv
extpoe
Configures an LLDP-MED-enabled port to advertise its
extended Power over Ethernet configuration and usage
information
IC 4-349
lldp medtlv
inventory
Configures an LLDP-MED-enabled port to advertise its
inventory identification details
IC 4-350
lldp medtlv
location
Configures an LLDP-MED-enabled port to advertise its
location identification details
IC 4-350
lldp medtlv
med-cap
Configures an LLDP-MED-enabled port to advertise its
Media Endpoint Device capabilities
IC 4-351
lldp medtlv
network-policy
Configures an LLDP-MED-enabled port to advertise its
network policy configuration
IC 4-351
show lldp config Shows LLDP configuration settings for all ports PE 4-352
show lldp info
local-device
Shows LLDP global and interface-specific configuration
settings for this device
PE 4-354
show lldp info
remote-device
Shows LLDP global and interface-specific configuration
settings for remote devices
PE 4-355
show lldp info
statistics
Shows statistical counters for all LLDP-enabled interfaces PE 4-356
Table 4-83 LLDP Commands (Continued)
Command Function Mode Page