LevelOne FGL-2870 - Manual (Page 540)

Command Line Interface
4-174
4
Default Setting
3 login attempts
Command Mode
Global Configuration
Example
web-auth quiet-period
This command defines the amount of time a host must wait after exceeding the limit
for failed login attempts, before it may attempt web authentication again. Use the no
form to restore the default.
Syntax
web-auth quiet-period time
no web-auth quiet period
time - The amount of time the host must wait before attempting
authentication again. (Range: 1-180 seconds)
Default Setting
60 seconds
Command Mode
Global Configuration
Example
web-auth session-timeout
This command defines the amount of time a web-authentication session remains
valid. When the session timeout has been reached, the host is logged off and must
re-authenticate itself the next time data transmission takes place. Use the no form to
restore the default.
Syntax
web-auth session-timeout timeout
no web-auth session timeout
timeout - The amount of time that an authenticated session remains valid.
(Range: 300-3600 seconds)
Default Setting
3600 seconds
Console(config)#web-auth login-attempts 2
Console(config)#
Console(config)#web-auth quiet-period 120
Console(config)#