LevelOne FGL-2870 - Manual (Page 611)

Automatic Traffic Control Commands
4-245
4
snmp-server enable port-traps atc multicast-control-apply
This command sends a trap when multicast traffic exceeds the upper threshold for
automatic storm control and the apply timer expires. Use the no form to disable this
trap.
Syntax
[no] snmp-server enable port-traps atc multicast-control-apply
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Related Commands
auto-traffic-control alarm-fire-threshold (4-238)
auto-traffic-control apply-timer (4-236)
snmp-server enable port-traps atc broadcast-control-release
This command sends a trap when broadcast traffic falls beneath the lower threshold
after a storm control response has been triggered and the release timer expires. Use
the no form to disable this trap.
Syntax
[no] snmp-server enable port-traps atc broadcast-control-release
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc
multicast-control-apply
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc
broadcast-control-release
Console(config-if)#