LevelOne FGL-2870 - Manual (Page 478)

Command Line Interface
4-112
4
privilege rerun
This command updates all privilege commands entered during the current session
to the running configuration.
Command Mode
Privileged Exec
Command Usage
Due to system limitations in the current software, privilege commands
(page 4-111) entered during the current switch session will not be stored
properly in the running-config file (see show running-config on page 4-30).
The privilege rerun command must therefore be used to correctly update
these commands to the running-config file.
Example
show privilege
This command shows the privilege level for the current user, or the privilege level for
commands modified by the privilege command (see page 4-111).
Syntax
show privilege [command]
command - Displays the privilege level for all commands modified by the
privilege command.
Command Mode
Privileged Exec
Example
This example shows the privilege level for any command modified by the privilege
command.
Console#privilege rerun
Console#
Console#show privilege command
privilege line all level 0 accounting
privilege exec level 15 ping
Console(config)#