LevelOne FGL-2870 - Manual (Page 741)

Multicast Filtering Commands
4-375
4
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form to disable it.
Syntax
[no] ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
ip igmp snooping vlan static
This command adds a port to a multicast group. Use the no form to remove the port.
Syntax
[no] ip igmp snooping vlan vlan-id static ip-address interface
• vlan-id - VLAN ID (Range: 1-4094)
• ip-address - IP address for multicast group
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28/52)
• port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Static multicast entries are never aged out.
show ip igmp snooping Shows the IGMP snooping and query configuration PE 4-377
show mac-address-table
multicast
Shows the IGMP snooping MAC multicast list PE 4-379
Console(config)#ip igmp snooping
Console(config)#
Table 4-91 IGMP Snooping Commands (Continued)
Command Function Mode Page