LevelOne FGL-2870 - Manual (Page 594)

Command Line Interface
4-228
4
Example
The following shows how to configure broadcast storm control at 500 kilobits per
second:
clear counters
This command clears statistics on an interface.
Syntax
clear counters interface
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28/52)
• port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the base
value for displayed statistics to zero for the current management session.
However, if you log out and back into the management interface, the statistics
displayed will show the absolute value accumulated since the last power reset.
Example
The following example clears statistics on port 5.
show interfaces brief
This command displays a summary of key information, including operational status,
native VLAN ID, default priority, speed/duplex mode, and port type for all ports.
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/5
Console(config-if)#switchport broadcast packet-rate 500
Console(config-if)#
Console#clear counters ethernet 1/5
Console#