Calendar set – LevelOne FGL-2870 User Manual
Page 445

System Management Commands
4-79
4
Command Mode
Global Configuration
Command Usage
• In some countries or regions, clocks are adjusted through the summer months
so that afternoons have more daylight and mornings have less. This is known
as Summer Time, or Daylight Savings Time (DST). Typically, clocks are
adjusted forward one hour at the start of spring and then adjusted backward
in autumn.
• This command sets the summer-time time zone relative to the currently
configured time zone. To display a time corresponding to your local time when
summer time is in effect, you must indicate the number of minutes your
summer-time time zone deviates from your regular time zone.
Example
Related Commands
calendar set
This command sets the system clock. It may be used if there is no time server on
your network, or if you have not configured the switch to receive signals from a time
server.
Syntax
calendar set hour min sec {day month year | month day year}
• hour - Hour in 24-hour format. (Range: 0-23)
• min - Minute. (Range: 0-59)
• sec - Second. (Range: 0-59)
• day - Day of month. (Range: 1-31)
• month - january | february | march | april | may | june | july | august |
september | october | november | december
• year - Year (4-digit). (Range: 2001-2100)
Default Setting
None
Command Mode
Privileged Exec
Console(config)#clock summer-time MESZ recurring 1 friday june 23 59 3
saturday september 2 55 60
Console(config)#