LevelOne FGL-2870 - Manual (Page 596)

Command Line Interface
4-230
4
Example
show interfaces counters
This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28/52)
• port-channel channel-id (Range: 1-8)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic Information:
Port Type: 100TX
Mac Address: 00-12-CF-12-34-57
Configuration:
Name:
Port Admin: Up
Speed-duplex: 100full
Capabilities: 100full
Broadcast Storm: Enabled
Broadcast Storm Limit: 64 Kbits/second
Multicast Storm: Disabled
Multicast Storm Limit: 64 Kbits/second
UnknownUnicast Storm: Disabled
UnknownUnicast Storm Limit: 64 Kbits/second
Flow Control: Disabled
VLAN Trunking: Disabled
LACP: Disabled
Port Security: Disabled
Max MAC Count: 0
Port Security Action: None
Media Type: None
Giga PHY mode: Auto preferred master
Current status:
Link Status: Up
Port Operation Status: Up
Operation Speed-duplex: 100full
Flow Control Type: None
Console#show interfaces status vlan 1
Information of VLAN 1
MAC Address: 00-12-CF-12-34-56
Console#