LevelOne FGL-2870 User Manual
Page 61

Main Menu
3-7
3
ARP Inspection
Validates the MAC-to-IP address bindings in ARP packets
Configuration
Enables inspection globally and per VLAN, specifies ACL filter
containing address bindings, configures validation of additional
address components, sets trust mode for ports, and sets rate
limit for packet inspection
Information
Displays information on results of inspection process
IP Filter
Sets IP addresses of clients allowed management access via
the web, SNMP, and Telnet
Port
Port Information
Displays port connection status
Trunk Information
Displays trunk connection status
Port Configuration
Configures port connection settings
Trunk Configuration
Configures trunk connection settings
Trunk Membership
Specifies ports to group into static trunks
LACP
Link Aggregation Control Protocol
Configuration
Allows ports to dynamically join trunks
Aggregation Port
Configures parameters for link aggregation group members
Aggregator
Configures the administration key for specific LACP groups
Port Counters Information
Displays statistics for LACP protocol messages
Port Internal Information
Displays settings and operational state for the local side
Port Neighbors Information Displays settings and operational state for the remote side
Port Broadcast Control
Sets the broadcast storm threshold for each port
Trunk Broadcast Control
Sets the broadcast storm threshold for each trunk
Port Multicast Control
Sets the multicast storm threshold for each port
Trunk Multicast Control
Sets the multicast storm threshold for each trunk
Port Unknown Unicast Control Sets the unknown unicast storm threshold for each port
Trunk Unknown Unicast Control Sets the unknown unicast storm threshold for each trunk
Mirror Port Configuration
Sets the source and target ports for mirroring
MAC Mirror Configuration
Sets a MAC address for packets to be mirrored from any source
port other thn the target port to the specified destination port
Rate Limit
Input Port Configuration
Sets the input rate limit for each port
Input Trunk Configuration Sets the input rate limit for each trunk
Output Port Configuration Sets the output rate limit for ports
Table 3-2 Main Menu (Continued)
Menu
Description
Page