LevelOne FGL-2870 - Manual (Page 408)

Command Line Interface
4-42
4
boot system
This command specifies the image used to start up the system.
Syntax
boot system {boot-rom| config | opcode}: filename
The type of file or image to set as a default includes:
• boot-rom* - Boot ROM.
• config* - Configuration file.
• opcode* - Run-time operation code.
• filename - Name of the configuration file or code image.
* The colon (:) is required.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• A colon (:) is required after the specified file type.
• If the file contains an error, it cannot be set as the default file.
Example
Related Commands
dir (4-40)
whichboot (4-41)
upgrade opcode auto
This command automatically upgrades the current operational code when a new
version is detected on the server indicated by the upgrade opcode path command.
Use the no form of this command to restore the default setting.
Syntax
[no] upgrade opcode auto
Default Setting
Disabled
Command Mode
Global Configuration
Console(config)#boot system config: startup
Console(config)#