Displaying switch hardware/software versions, Figure 3-4, Switch information – LevelOne FGL-2870 User Manual
Page 69

Basic Configuration
3-15
3
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports.
• Hardware Version – Hardware version of the main board.
• Chip Device ID – Identifier for basic MAC/Physical Layer switch chip.
• Internal Power Status – Displays the status of the internal power supply.
Management Software
• EPLD Version – Version number of the Electronically Programmable Logic Device
code.
• Loader Version – Version number of loader code.
• Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.
• Operation Code Version – Version number of run-time code.
• Role – Shows that this switch is operating as Master or Slave.
Web – Click System, Switch Information.
Figure 3-4 Switch Information