LevelOne FGL-2870 - Manual (Page 613)

Automatic Traffic Control Commands
4-247
4
show auto-traffic-control interface
This command shows interface configuration settings and storm control status for
the specified port.
Syntax
show auto-traffic-control interface [interface]
interface
ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28/52)
Command Mode
Privileged Exec
Example
Console#show auto-traffic-control interface e 1/1
Eth 1/1 Information
------------------------------------------------------------------------
Storm Control: Broadcast Multicast
State: Disabled Disabled
Action: rate-control rate-control
Auto Release Control: Disabled Disabled
Alarm Fire Threshold(Kpps): 128 128
Alarm Clear Threshold(Kpps):128 128
Trap Storm Fire: Disabled Disabled
Trap Storm Clear: Disabled Disabled
Trap Traffic Apply: Disabled Disabled
Trap Traffic Release: Disabled Disabled
------------------------------------------------------------------------
Console#