FEC FUSIONE-HS-2 - Manual (Page 8)

Transport the equipment properly according to its weight.
Failure to observe this instruction may cause
The conditions when transporting the equipment by ship is as below.
¢ Ambient temperature: -
¢ Ambient humidity: 50% RH or lower
¢ Package: Tight seal
¢ Rust prevention measure: Apply
Failure to observe this instruction may cause
Do not transport tools by grasping cables
Failure to observe this instruction may cause
.The equipment shall be stored under the following conditions.
¢ Ambient temperature: -
¢ Ambient humidity: 90% RH or lower
¢ Atmosphere: Indoors (Avoid direct sunlight)
No corrosive gases or flammable gases
No oil mist, dust, water, salt, iron powder
¢ Avoid direct vibration or shocks
Failure to observe this instruction may cause
Transportation / Storage
Safety Precautions
Transport the equipment properly according to its weight.
this instruction may cause injury and malfunction.
The conditions when transporting the equipment by ship is as below.
-5°C
£
+55°C (Avoid freezing)
0% RH or lower (Avoid moisture)
Rust prevention measure: Apply light oil on steel portion of tools.
this instruction may cause earth leakage and malfunction.
transport tools by grasping cables.
this instruction may cause injury and malfunction.
The equipment shall be stored under the following conditions.
-5°C
£
+55°C (Avoid freezing)
Ambient humidity: 90% RH or lower (Avoid moisture)
Indoors (Avoid direct sunlight)
corrosive gases or flammable gases
No oil mist, dust, water, salt, iron powder
Avoid direct vibration or shocks
this instruction may cause a ground fault and malfunction.
Caution
Transportation / Storage
Safety Precautions