FEC FUSIONE-HS-2 - Manual (Page 7)

Do not remove the motor
The tool output spindle may rotate and cause injury.
Do not repair, disassemble, or modify the equipment
Failure to observe
Never operate the eq
or flammable gases
Keep fingers away from the
ter the equipment is turn
shock.
Wiring, operation and maintenance work shall be conducted by a
Failure to observe
Turn OFF the power when conducting wiring operation
Failure to observe
Never damage the cables, apply excess
Never use damaged cables.
Failure to observe
Properly GROUND all Field Ground (
pin on the POWER CORD.
power cord grounded!
Failure to observe
In case of an abnormal odor, noise, or operation error
and turn OFF the power
Install a Power shutdown
Failure to observe
When equipment is automatically operated, i
equipment in order to stop
Keep away from the equipment
measures are conducted
Failure to observe
Do not remove the motors and gear cases of tools while power is applied.
tool output spindle may rotate and cause injury.
Do not repair, disassemble, or modify the equipment individual components of the system.
this instruction may cause injury, electric shock, fire, and malfunction.
Never operate the equipment where it is exposed to water, near a corrosive
flammable gases. Failure to observe this instruction may cause fire.
Keep fingers away from the connectors while the equipment is turned ON
ter the equipment is turned OFF. Failure to observe this instruction may cause
operation and maintenance work shall be conducted by a qualified
this instruction may cause electric shock and injury.
Turn OFF the power when conducting wiring operation and maintenance
this instruction may cause electric shock and injury.
damage the cables, apply excess stress to cables, or squeeze the cables.
Never use damaged cables.
this instruction may cause electric shock and fire.
Properly GROUND all Field Ground (FG) Connections and terminals including the ground
pin on the POWER CORD. NEVER operate this equipment without the ground pin on the
power cord grounded!
this instruction may cause electric shock.
abnormal odor, noise, or operation error occurrence, stop operation
power source. Failure to observe this instruction may cause
Install a Power shutdown device in order to ensure the safety of equipment.
this instruction may cause injury.
When equipment is automatically operated, install an emergency stop circuit
der to stop operation promptly. Failure to observe this, may cause
Keep away from the equipment during recovery from a temporary blackout
measures are conducted after restarting the equipment. The equipment may
this instruction may cause injury.
Warning
Safety Precautions
while power is applied..
individual components of the system..
injury, electric shock, fire, and malfunction.
corrosive atmosphere
fire.
connectors while the equipment is turned ON and for a while af-
this instruction may cause electric
qualified professional.
maintenance.
the cables.
including the ground
operate this equipment without the ground pin on the
stop operation immediately
this instruction may cause injury and fire.
in order to ensure the safety of equipment.
rgency stop circuit on the outside of
may cause injury.
recovery from a temporary blackout, and ensure safety
he equipment may suddenly restart.