FEC FUSIONE-HS-2 - Manual (Page 157)

FUSION Operations Manual Chapter 7: System Operations (Rev.2)
Page 7-33
7.6 Tubenut Head Set-up
Tubenut heads are used for applications that require a socket to be inserted around a tube to
fasten an accompanying tubenut. They require a special function to re-align the “U” shaped
socket back to it’s “open” position in order to remove the nutrunner from the tube after fasten-
ing. When using an optional Tubenut head, special programming options MUST be set-up to
enable the Tubenut socket automatic return function along with various other considerations.
Tubenut head applications inherently present safety concerns especially in the area of the
open “U” shaped socket. The opening of the “U” shaped socket presents a PINCH POINT
while rotating.
WARNING: KEEP ALL BODY PARTS AWAY FROM THE TUBENUT HEAD
SOCKET OPENING DURING OPERATION OR PERSONAL INJURY MAY
RESULT!
PLEASE CONSULT YOUR PLANT SAFETY PERSONNEL BEFORE
USING THIS HEAD!
All safety precautions MUST be followed to ensure safe operation and
operator safety!