FEC FUSIONE-HS-2 - Manual (Page 21)

FEC FUSION Operations Manual Chapter 1: Outline (Rev 2)
Page 1-7
• Cleaning
Do not use any organic solvents, such as thinner, to clean a Controller unit or a tool.
The solvent could melt the surface paint, or penetrate inside and cause damage. A
cloth dampened with alcohol or warm water should be used to lightly wipe the
components.
• Handling and Shipping
It is critical that FUSION System components are properly handled and shipped in order
to maintain the System's integrity. Adhere to the following requirements for shipping
and handling:
• Loose FUSION System components must be individually packaged in an approved anti-
static container or wrap to prevent damage from electrostatic discharge.
• Adhere to Chapter 2 Specifications for environmental requirements.