FEC FUSIONE-HS-2 - Manual (Page 47)

FEC FUSION Operations Manual
4.5 Connection Diagram
A basic layout of System
ence drawings can
WARNING: Follow Lockout/Tagout and other safety precautions when connecting and/or
disconnecting cabling, wiring, and equipment.
The Fusion controller can be connected to various external devices for control and monitoring
the fastening process.
control I/O is required, d
for external controllers (PLC or PC Control). Serial RS232 or optional Ethernet is available
for resultant fastening data output.
RS232 connection with a computer runnin
FEC FUSION Operations Manual Chapter 4: System Setup and Wiring (Rev. 2.1)
Page 4-9
Diagram
A basic layout of System component interconnection is shown in Figure 4
ence drawings can be found throughout this Chapter, and also in Appendix A.
Follow Lockout/Tagout and other safety precautions when connecting and/or
disconnecting cabling, wiring, and equipment.
FIG. 4-5 Connection Diagram
The Fusion controller can be connected to various external devices for control and monitoring
the fastening process. The system will operate with no connection to any external devices. If
control I/O is required, discrete Inputs / Outputs or optional fieldbus connection is
external controllers (PLC or PC Control). Serial RS232 or optional Ethernet is available
for resultant fastening data output. Additionally, the front panel provides easy access for
RS232 connection with a computer running the AFC User Console software.
Chapter 4: System Setup and Wiring (Rev. 2.1)
nection is shown in Figure 4-5. Detailed refer-
be found throughout this Chapter, and also in Appendix A.
Follow Lockout/Tagout and other safety precautions when connecting and/or
The Fusion controller can be connected to various external devices for control and monitoring
The system will operate with no connection to any external devices. If
ldbus connection is available
external controllers (PLC or PC Control). Serial RS232 or optional Ethernet is available
Additionally, the front panel provides easy access for
g the AFC User Console software.