Technicolor - Thomson ST585 V6 - Manual (Page 86)

E-DOC-CTC-20061027-0004 v1.0
ATM Commands
62
atm qosbook ctdadd
Add a Connection Traffic Descriptor (CTD).
SYNTAX:
where:
EXAMPLE:
atm qosbook ctdadd name =
conformance = <{UBR | CBR | VBR }>
[peakrate = ]
[sustrate = [maxburst = ]
[realtime = <{enabled | disabled}>]
name The name of the new CTD. REQUIRED
conformance The ATM service conformance definition. REQUIRED
peakrate A number between 0 and 27786.
Represents the peak rate (in kilobits per second).
The default is
0 (indicates linerate for UBR).
OPTIONAL
sustrate A number between 0 and 27786.
Represents the sustainable rate (in kilobits per second) (VBR only).
The default is
0 .
OPTIONAL
maxburst A number between 48 and 12240.
Represents the maximum burst size (in bytes) (VBR or GFR).
The default is
0 .
OPTIONAL
realtime Enable or disable realtime traffic (VBR only).
The default is
disabled .
OPTIONAL
=>atm qosbook ctdadd name=High conformance=CBR peakrate=27786
=>atm qosbook ctdlist
Name
Ref Conf Peak Sust Burst Minrate Frame Cdvt RT FD
(Kbits) (Kbits) (bytes) (Kbits) (bytes)
default 2 UBR linerate 0 0 0 0 0 disabled disab
led
High
0 CBR 27786 0 0 0 0 0 disabled disab
led
=>