Technicolor - Thomson ST585 V6 - Manual (Page 375)

E-DOC-CTC-20061027-0004 v1.0
Firewall Commands
351
EXAMPLE:
RELATED COMMANDS:
=>firewall level list
Level Config
============
Active level: Disabled
nr name udptrack service readonly description
---------------------------------------------------------------------------------------
1
BlockAll strict disabled yes Use this Security Level to block all
traffic from and to the Internet.
2 Standard loose enabled yes Use this Security Level to allow all
outgoing connections and block all
incoming traffic. Services and
Application Sharing are allowed to open
pinholes in the firewall.
3 Disabled loose enabled yes Disabled the firewall. All traffic is
allowed to pass through your SpeedTouch
.
=>firewall level add name=Test text="Another level in the firewall"
=>firewall level
list
Level Config
============
Active level: Disabled
nr name udptrack service readonly description
-----------------------------------------------------------------------------------------
1
BlockAll strict disabled yes Use this Security Level to block all
traffic from and to the Internet.
2 Standard loose enabled yes Use this Security Level to allow all
outgoing connections and block all
incoming traffic. Services and
Application Sharing are allowed to open
pinholes in the firewall.
3 Disabled loose enabled yes Disabled the firewall. All traffic is
allowed to pass through your SpeedTouch
.
4
Test strict disabled yes Another level in the firewall
=>
firewall level delete Delete a security level.
firewall level list List all the security levels.