Technicolor - Thomson ST585 V6 - Manual (Page 160)

E-DOC-CTC-20061027-0004 v1.0
DHCP Commands
136
dhcp relay ifconfig
Configure a DHCP relay interface.
SYNTAX:
where:
dhcp relay ifconfig intf =
[relay = <{disabled | enabled}>]
[maxhops = ]
[remoteid = ]
[trusted = <{disabled | enabled}>]
intf The name of the dynamic interface to be configured. REQUIRED
relay Set the relay status to enabled or disabled.
The default is
disabled .
OPTIONAL
maxhops A number between 0 and 16.
Represents the maximum number of hops allowed in the
DHCP packet.
The default is
4 .
OPTIONAL
remoteid Set the remote ID as specified in RFC3046. OPTIONAL
trusted Drop/forward DHCP request packet when the DHCP Relay
Agent Option is enabled (with the command
:dhcp relay
config agentinfo=enabled) and the giaddr field is 0
(RFC3046)) (enabled) or not (disabled).
The default is
disabled .
OPTIONAL