Technicolor - Thomson ST585 V6 - Manual (Page 643)

E-DOC-CTC-20061027-0004 v1.0
Script Commands
619
script list
Display a script or all scripts.
SYNTAX:
where:
EXAMPLE
Some of the default scripts are shown below:
RELATED COMMANDS:
script list [name = ]
name Name of the script to be listed.
Note If not specified, all the scripts are displayed.
OPTIONAL
=>script list
Script: autopvc_add_qos
0: qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6
rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes
...
Script: autopvc_add_bridge
0: qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6
rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes
1: phonebook add name _auto_$1_$2 addr $1.$2 type any dynamic yes
2: bridge ifadd intf _auto_$1_$2 dest _auto_$1_$2
3: bridge ifconfig intf _auto_$1_$2 qos _auto_$1_$2
4: bridge ifattach intf _auto_$1_$2
Script: autopvc_delete_bridge
0: bridge ifdetach intf _auto_$1_$2
1: bridge ifdelete intf _auto_$1_$2
2: phonebook delete name _auto_$1_$2
3: qosbook delete name _auto_$1_$2
Script: autopvc_add_pppoerelay
0: qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6
rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes
1: phonebook add name _auto_$1_$2 addr $1.$2 type any dynamic yes
2: ethoa ifadd intf _auto_$1_$2 dest _auto_$1_$2
3: ethoa ifconfig intf _auto_$1_$2 qos _auto_$1_$2
4: ethoa ifattach intf _auto_$1_$2
5: ip ifwait intf _auto_$1_$2 timeout 15 adminstatus up
6: pppoe relay add port _auto_$1_$2
script add Add a line to a script.
script delete Delete a complete script or a line from a script.