Technicolor - Thomson ST585 V6 - Manual (Page 437)

E-DOC-CTC-20061027-0004 v1.0
IGMP Commands
413
igmp proxy config
Configure the IGMP proxy.
SYNTAX:
where:
igmp proxy config [state = <{disabled | enabled}>]
[qi = ]
[qri = ]
[lmqi = ]
[rv = ]
[requirera = <{disabled | enabled}>]
[localgroup = <{disabled | enabled}>]
state Enable or disable the IGMP proxy.
The default is
disabled .
OPTIONAL
qi A number between 1 and 86400.
Represents the interval in seconds between general queries sent
by the querier. OPTIONAL
qri A number between 1 and 86400.
Represents the maximum response time in seconds for an IGMP
client in reply to general queries. OPTIONAL
lmqi A number between 1 and 86400.
Represents the maximum response time in seconds for an IGMP
client in reply to group specific queries. OPTIONAL
rv A number between 2 and 10.
Represents the robustness variable, which allows tuning for
expected IGMP packet loss. OPTIONAL
requirera Enable or disable the router alert IP option check.
The default is
disabled .
OPTIONAL
localgroup Enable or disable the processing of a local multicast group in an
IGMP packet.
The default is
disabled .
OPTIONAL