Technicolor - Thomson ST585 V6 - Manual (Page 136)

E-DOC-CTC-20061027-0004 v1.0
DHCP Commands
112
dhcp client ifconfig
Configure a DHCP client.
SYNTAX:
where:
RELATED COMMANDS
i
Use the command :dhcp client ifrelease before configuring the dhcp client.
dhcp client ifconfig intf =
[label = ]
[metric = ]
[dnsmetric = ]
[broadcast = <{disabled|enabled}>]
intf The name of the dynamic interface to be configured. REQUIRED
label Label for default gateway and static routes. OPTIONAL
metric A number between 0 and 255.
Represents the route metric for default gateway and static
routes.
The default is
1 .
OPTIONAL
dnsmetric A number between 0 and 100.
Represents the DNS route metric.
The default is
1 .
OPTIONAL
broadcast Operate client in unicast/broadcast mode.
The default is
enabled .
OPTIONAL
label add Create a new label.