Technicolor - Thomson ST585 V6 - Manual (Page 688)

E-DOC-CTC-20061027-0004 v1.0
SNTP Commands
664
sntp list
List the NTP servers.
SYNTAX:
EXAMPLE:
DESCRIPTION:
The status of an NTP server can be:
> Not used : The Thomson ST SNTP client is disabled. As a consequence, none of the NTP servers are used.
> Contacting... : The Thomson ST SNTP client is trying to contact this NTP server.
> Unable to contact : The Thomson ST SNTP client is unable to contact this NTP server. It may be down, or
no end-to-end connectivity exists (no connection, no DSL,...).
> Synchronized : The Thomson ST SNTP client was able to contact this NTP server. If required the internal
clock has been synchronized with this NTP server.
RELATED COMMANDS:
sntp list
=>sntp list
IP Address
Version Status Name
100.101.110.111 4 contacting ...
100.101.110.112 4 Unable to contact
100.101.110.113 4 Synchronized
=>
sntp add Add a Network Time Protocol (NTP) server to the NTP server list.
sntp delete Delete an NTP server from the NTP server list.