Technicolor - Thomson ST585 V6 User Manual
Page 131
E-DOC-CTC-20061027-0004 v1.0
DHCP Commands
107
9
DHCP Commands
Introduction
This chapter describes the commands of the Dynamic Host Configuration Protocol (DHCP) command group.
Contents
This chapter covers the following commands:
Delete all the DHCP leases.
De-activate a DHCP client and releases its lease.
List all the DHCP leases attached to dynamic interfaces.
Clear the DHCP client statistics.
Print the DHCP client statistics.
Modify the DHCP client trace configuration.
Add a DHCP Option Code to the Parameter Request List.
Delete a DHCP Option Code from the Parameter Request
List.
List all DHCP Option Codes in the Parameter Request List.
dhcp client rqoptions optionlist
List all DHCP Option Codes that can be used in the
Parameter Request List.
dhcp client txoptions optionlist
Lists all DHCP Option Codes that can be used.
Add an entry to the DHCP forward list.
Show the DHCP relay statistics.
Modify the DHCP relay trace configuration.
Set the DHCP relay configuration settings.
Delete an entry from the DHCP forward list.
Flush the DHCP relay settings.
Configure a DHCP relay interface.
Show the configuration of the relay interfaces.
Modify an entry from the DHCP forward list.