Technicolor - Thomson ST585 V6 - Manual (Page 162)

E-DOC-CTC-20061027-0004 v1.0
DHCP Commands
138
dhcp relay iflist
Show the configuration of the relay interfaces.
SYNTAX:
where:
EXAMPLE:
dhcp relay iflist [intf = ]
intf The name of the dynamic interface to be listed.
Note If not specified, all the relay interfaces will be shown.
OPTIONAL
=>dhcp relay iflist
eth0 :
admin state = up oper state = up
max hops = 4
trusted = disabled
remote id =
Internet_trigger :
admin state = up oper state = up
max hops = 4
trusted = enabled
remote id =
Internet :
admin state = down oper state = down
max hops = 4
trusted = disabled
remote id =
=>