Eth bridge igmpsnooping ifconfig, Eth commands, Syntax – Technicolor - Thomson ST585 V6 User Manual
Page 307
E-DOC-CTC-20061027-0004 v1.0
Eth Commands
283
eth bridge igmpsnooping ifconfig
Configure the bridge interface‘s IGMP snooping flags and mode.
Syntax
where:
eth bridge igmpsnooping ifconfig
[brname = <{bridge}>]
intf = <{interface}>
[portmode = <{Host|Router|Auto}>]
[fastleave = <{disabled|enabled}>]
[exptrack = <{disabled|enabled}>]
[mrdp = <{disabled|enabled}>]
[rgmp = <{disabled|enabled}>]
brname
The bridge instance currently to be configured
OPTIONAL
intf
The bridge interface currently to be configured
REQUIRED
portmode
Mode of the bridge port
OPTIONAL
fastleave
Enable/Disable Fast Immediate Leave
OPTIONAL
exptrack
Enable/Disable Explicit Host Tracking
OPTIONAL
mrdp
Enable/Disable MRDP support
OPTIONAL
rgmp
Enable/Disable RGMP support
OPTIONAL