Technicolor - Thomson ST585 V6 - Manual (Page 662)

E-DOC-CTC-20061027-0004 v1.0
Service Commands
638
EXAMPLE:
RELATED COMMANDS:
=>service system list
Idx Name
Protocol SrcPort DstPort Group State
---------------------------------------------------------------------------------
1 DNS-C udp 53 enabled
2 SNTP udp 123 123 enabled
3 SLA_ICMP_PING icmp 8 enabled
4 SLA_UDP_PING udp 7 enabled
5 SLA_ICMP_TRRT icmp 8 enabled
6 SLA_UDP_TRRT udp 33434 enabled
7 SYSLOG udp 514 enabled
8 HTTP tcp 80 enabled
9 HTTPs tcp 443 enabled
10 HTTPI tcp 8080 enabled
11 FTP tcp 21 enabled
12 TELNET tcp 23 enabled
13 RIP udp 520 520 enabled
14 RIP-Query udp 520 enabled
15 DNS-S udp 53 enabled
16 Dynamic DNS enabled
17 DHCP-S udp 49152 disabled
18 SNMP_AGENT udp 161 enabled
19 SNMP_TRAPS udp enabled
20 MDAP udp 3235 enabled
21 SIPPBX udp 5060 disabled
22 IKE udp 500 enabled
23 IP_COMMANDS enabled
24 PING_RESPONDER icmp 8 enabled
=>
=>service system list name=SIPPBX expand=enabled
Idx Name
Protocol SrcPort DstPort Group State
---------------------------------------------------------------------------------
1 SIPPBX udp 5060 disabled
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... any
Ip Access List............. any
NAT Port List.............. 5060
=>
service system modify Modify a system service.