Technicolor - Thomson ST585 V6 - Manual (Page 356)

E-DOC-CTC-20061027-0004 v1.0
Expr Commands
332
intfgroup The IP interface group.
Choose between:
> wan
> local
>
lan
>
tunnel
>
dmz
>
guest.
Note Only for expression type intf .
OPTIONAL
bridgeport The bridge port number.
Note Only for expression type intf .
OPTIONAL
tos A number between 0 and 255.
Represents the ToS specification in the IP packet.
Note The parameters tos , precedence and dscp are mutually
exclusive.
OPTIONAL
precedence The precedence in the IP packet (part of tos).
Select an IP precedence (see
“ IP Precedence” on page 792 ) or,
alternatively, specify the number.
Note The parameters tos , precedence and dscp are mutually
exclusive.
OPTIONAL
dscp The DSCP in the IP packet (part of tos).
Select a DSCP (see
“ Differentiated Services Code Point (DSCP)”
on page 793 ).
Note The parameters tos , precedence and dscp are mutually
exclusive.
OPTIONAL
proto The protocol (name or number) expected in the IP packet.
Select one of the following protocols:
icmp , igmp , ipinip , tcp ,
udp , ah , esp , ipcomp or, alternatively, specify the protocol
number.
OPTIONAL
srcport The TCP/UDP port (or beginning of range) the packet is coming
from.
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port Names” on page 787 ) or,
alternatively, specify the protocol number.
OPTIONAL
srcportend The source TCP/UDP port range end (inclusive).
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port Names” on page 787 ) or,
alternatively, specify the protocol number.
OPTIONAL
dstport The TCP/UDP port (or beginning of range) the packet is going to.
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port Names” on page 787 ) or,
alternatively, specify the protocol number.
OPTIONAL
dstportend The destination TCP/UDP port range end (inclusive).
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port Names” on page 787 ) or,
alternatively, specify the protocol number.
OPTIONAL
icmptype The ICMP type (name or number) of the packet.
Select one of the supported ICMP types (see
“ Supported ICMP
Type Names” on page 790 ) or, alternatively, specify the type
number.
OPTIONAL