Technicolor - Thomson ST585 V6 - Manual (Page 603)

E-DOC-CTC-20061027-0004 v1.0
PPP Commands
579
30 PPP Commands
Introduction
This chapter describes the commands of the ppp command group.
Contents
This chapter covers the following commands:
ppp flush Flush all PPP interfaces. 580
ppp ifadd Create a new PPP interface. 581
ppp ifattach Attach a PPP interface. 583
ppp ifconfig Configure a PPP interface. 585
ppp ifdelete Delete a PPP interface. 590
ppp ifdetach Detach a PPP interface. 592
ppp iflist Display the PPP interfaces. 594
ppp ifscan Scan a PPPoE interface for available Access Concentrator and
Service names. 595
ppp rtadd Add a route to the routing table when the PPP link comes up. 596
ppp rtdelete Delete the route for a PPP link. 598
ppp relay flush Remove all Ethernet interfaces from the PPP relay agent list and
terminate all sessions. 600
ppp relay ifadd Add an Ethernet interface to the PPP relay list. 601
ppp relay ifconfig Modify an ethernet interface from the PPP relay agent list. 602
ppp relay ifdelete Delete an Ethernet interface from the PPP relay agent list. 603
ppp relay iflist Display all Ethernet interfaces added to the PPP relay agent list. 604
ppp relay sesslist Add an Ethernet interface to the PPP relay list. 605