Technicolor - Thomson ST585 V6 - Manual (Page 685)

E-DOC-CTC-20061027-0004 v1.0
SNTP Commands
661
sntp config
Modify/display the SNTP client configuration.
SYNTAX:
where:
EXAMPLE:
sntp config [enable = <{enabled | disabled}>]
[poll = ]
[pollpresync = ]
enable Enable or disable the Thomson ST SNTP client.
The default is
enabled .
OPTIONAL
poll A number between 1 and 60 (minutes).
Represents the time interval for the SNTP client to poll the configured
NTP server and, if needed, (re-)synchronize its internal clock.
The default is
60 .
OPTIONAL
pollpresync polling interval before first sync (1 min, ... ,60min) OPTIONAL
=>sntp config
SNTP configuration:
state = enabled
poll interval = 60 minute(s)
poll interval (before first sync) = 60 minute(s)
=>