Technicolor - Thomson ST585 V6 - Manual (Page 401)

E-DOC-CTC-20061027-0004 v1.0
GRP Commands
377
EXAMPLE:
RELATED COMMANDS:
=>grp rip show
RIP routing protocol config dump
------------------------------------
RIP daemon is enabled
Global RIP queries received : 0
Global RIP route changes : 0
Default version : send rip_v2, receive rip_v2
Default redistribution metric is 1
Sending routing table updates every 30 seconds with +/-5%
Route timeout after 180 seconds
Route garbage collect after 120 seconds
Import of connected routes is enabled
Import of kernel routes is enabled
Import of static routes is enabled
Import of default kernel route is enabled
Import of default static route is enabled
Export of RIP routes is enabled
Export of default RIP route is enabled
Transmission of default RIP route is enabled
Interface Send Recv AuthMode Passive SplitHorizon BadPackets
BadRoutes SentUpdates
---------------------------------------------------------------------------------------------
-------------------
lan1 rip_unspec rip_unspec none enabled enabled 0 0
0
Internet rip_unspec rip_unspec none enabled enabled 0 0
0
RIP routing table dump
--------------------------
Codes : K - Kernel, C - connected, S - Static, R - RIP, * - FIB route
Network Next Hop Metric From Flags
----------------------------------------------------------------------
C 10.0.0.0/24 1 <> *
C 192.168.1.0/24 1 <> *
=>
grp rip show Show the RIP settings and the routes in the RIP database.