Technicolor - Thomson ST585 V6 - Manual (Page 374)

E-DOC-CTC-20061027-0004 v1.0
Firewall Commands
350
firewall level add
Add a security level.
SYNTAX:
where:
firewall level add name =
[index = ]
[readonly = <{disabled | enabled}>]
[udptrackmode = <{strict | loose}>]
[service = <{disabled | enabled}>]
[proxy = <{disabled|enabled}>]
[text = ]
name The name of the security level to be added. REQUIRED
index The index of the security level.
Tip Use the command :firewall level list to
obtain a list of indexes.
Note If not specified, the new security level will be added at
the bottom of the list.
OPTIONAL
readonly Select whether the security level is readonly (enabled) or not
(disabled).
The default is
enabled .
OPTIONAL
udptrackmode Select the UDP connection tracking mode.
Choose between:
> strict : replies to a request from a client must be in a specific
window to the client.
> loose : inbound packets are allowed on the port that was
first used to start the communication with the server (for
example to allow a client of an online game to obtin peer-
to-peer information from other clients of that same online
game).
The default is strict .
OPTIONAL
proxy Enable or disable proxy system services for this security level. OPTIONAL
service Disable or enable host service definitions.
The default is
disabled .
OPTIONAL
text Description of the security level.
Note The maximum length is 39 characters.
OPTIONAL