Wireless macacl register, Wireless commands – Technicolor - Thomson ST585 V6 User Manual
Page 769
E-DOC-CTC-20061027-0004 v1.0
Wireless Commands
745
wireless macacl register
Start a registration process (only for register mode).
Prerequisite
The register mode must be enabled (with the command
:wireless macacl config control=register).
Registration Process
After executing this command, the ACL will be unlocked for a time period of 60 seconds.
Any wireless client who tries to assiociate with the Thomson ST during this period and who has the correct
wireless settings, will be added to the ACL.
SYNTAX:
where:
EXAMPLE:
i
If the register mode is not enabled when the registration process is started, a warning will be
displayed.
wireless macacl register
proceed = <{disabled | enabled}>
proceed
Confirm to start the registration process.
Choose between:
>
disabled
>
enabled.
REQUIRED
=>wireless macacl register proceed=enabled
Registration process will be started, new stations can associate during 60 seconds.
=>wireless macacl register proceed=disabled
=>