Wireless secmode config, Configure/show the security mode, Wireless commands – Technicolor - Thomson ST585 V6 User Manual
Page 778: Syntax, Example
E-DOC-CTC-20061027-0004 v1.0
Wireless Commands
754
wireless secmode config
Configure/show the security mode.
SYNTAX:
where:
EXAMPLE:
wireless secmode config
[mode = <{disable | wep | wpa-psk | wpa}>]
mode
The security mode.
Choose between:
>
disable
: no security
>
wep
: Wired Equivalent Privacy (WEP)
>
wpa-psk
: Wi-Fi Protected Access (WPA) - Pre-Shared Key (PSK)
>
wpa:
Wi-Fi Protected Access (WPA).
The default is
disable
(in other words, by default, there is no security.
This is to enable an easy first use).
OPTIONAL
=>wireless secmode config
No security enabled, open authentication, no data encryption
=>wireless secmode config mode=wep
=>wireless secmode config
Security level WEP:
encryption key
: 26FF871306
=>wireless secmode config mode=wpa-psk
=>wireless secmode config
Security level WPA-PSK:
preshared key
: 26FF871306
encryption
: TKIP
rekeying
: every 0 seconds
=>