Ppp ifadd, Create a new ppp interface, Ppp commands – Technicolor - Thomson ST585 V6 User Manual
Page 605: Syntax, Example
E-DOC-CTC-20061027-0004 v1.0
PPP Commands
581
ppp ifadd
Create a new PPP interface.
SYNTAX:
where:
EXAMPLE:
ppp ifadd
intf =
intf
The name for the new PPP interface.
Note
If not specified, the destination parameter must be specified.
In this case the name of the destination will double as
interface name.
REQUIRED
=>ppp iflist
Internet: dest : RELAY
[00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0
mru = 1492
Tx inactivity = 1200s
left = 0s
auth = auto
user =
password =
admin state = down
oper state = down
link state = not-connected
LCP : state = initial
retransm = 10
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
acname : ---
service : ---
=>ppp ifadd intf=Rt_PPPoA
=>ppp iflist
Internet: dest : RELAY
[00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0
mru = 1492
Tx inactivity = 1200s
left = 0s
auth = auto
user =
password =
admin state = down
oper state = down
link state = not-connected
LCP : state = initial
retransm = 10
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
acname : ---
service : ---
Rt_PPPoA: dest :
[00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0
mru = 1500
auth = auto
user =
password =
admin state = down
oper state = down
link state = not-connected
LCP : state = initial
retransm = 10
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
=>