Technicolor - Thomson ST585 V6 - Manual (Page 237)

E-DOC-CTC-20061027-0004 v1.0
DSD Commands
213
dsd debug proxy
Display/modify the HyperText Transfer Protocol (HTTP) Intercept fixed proxy configuration.
SYNTAX:
where:
EXAMPLE:
dsd debug proxy [state = <{disabled | enabled}>]
[dest = ]
[port = <{supported TCP/UDP port} or number>]
state Enable or disable fixed proxy redirecting.
The default is
disabled .
OPTIONAL
dest The destination IP address to which requests will be forwarded. OPTIONAL
port The port to be used for connecting to proxy.
Select one of the supported Transmission Control Protocol (TCP)/UDP
port names (see
“ Supported TCP/UDP Port Names” on page 787 ) or,
alternatively, specify the port number.
OPTIONAL
=>dsd debug proxy
State
: off
Dest.IP : 0.0.0.0
Port
: 0
=>