Technicolor - Thomson ST585 V6 - Manual (Page 672)

E-DOC-CTC-20061027-0004 v1.0
SNMP Commands
648
snmp community add
Configure an SNMP community string to allow SNMP access over IP.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
snmp community add securityname = <{RWCommunity | ROCommunity}>
communityname =
securityname Configure access rights/restrictions control for the community
name.
Choose between:
> RWCommunity : read/write access rights
> ROCommunity : read only access rights.
REQUIRED
communityname Configure the SNMP community name. REQUIRED
=>snmp community add
securityname = RWCommunity
communityname = *******
Please retype communityname for verification.
communityname = *******
:snmp community add securityname=RWCommunity communityname=_DEV_2C6A78E1C41E7B01
=>snmp community add
securityname = ROCommunity
communityname = ******
Please retype communityname for verification.
communityname = ******
:snmp community add securityname=ROCommunity communityname=_DEV_184B05F89719A74E
=>
snmp community delete Delete an SNMP community string to prevent SNMP access over IP.
snmp community list List all SNMP community strings in use for SNMP access over IP.