beautypg.com

Dhcp commands, 171 example – Technicolor - Thomson ST585 V6 User Manual

Page 195

background image

E-DOC-CTC-20061027-0004 v1.0

DHCP Commands

171

EXAMPLE:

gateway

The IP address of the default gateway for the DHCP clients.
The default value of this parameter is 0 (not specified), which
means that the gateway IP address will be communicated by
the remote server as soon as the PPP IPCP subnetmasking
connection is established or that the Thomson ST acts as the
LAN default gateway.

OPTIONAL

server

The IP address of the DHCP server for DHCP clients.

OPTIONAL

primdns

The IP address of the primary DNS server for the DHCP clients.
The default value of this parameter is 0 (not specified), which
means that the IP address of the DNS server will be
communicated by the remote server as soon as the PPP IPCP
subnetmasking connection is established or that the
Thomson ST acts as the LAN DNS server.

OPTIONAL

secdns

The IP address of the optional secondary DNS server for DHCP
clients.
The default value of this parameter is 0 (not specified), which
means that the gateway IP address will be communicated by
the remote server as soon as the PPP IPCP subnetmasking
connection is established.

OPTIONAL

dnsmetric

The DHCP server pool DNS route metric.

OPTIONAL

primwins

The IP address of the primary Windows Internet Naming
Service (WINS) server for DHCP clients.

OPTIONAL

secwins

The IP address of the secondary WINS server for DHCP clients.

OPTIONAL

leasetime

A number (of seconds).
Represents the time in seconds a client is allowed to use an
address.

Note

Specifying 0 makes the lease permanent.

OPTIONAL

unnumbered

Assign an IP address from this pool to the DHCP server
(enabled) or not (disabled).

Note

For dynamic pools only.

OPTIONAL

localgw

Proxy for a virtual default gateway residing in same subnet of
DHCP client instead of the remote peer address.

OPTIONAL

=>dhcp server pool list
Pool

Start

End

Intf

State

0 LAN_Private

10.0.0.1

10.0.0.254

eth0

USED

=>dhcp server pool config name=My_Pool poolstart=192.6.11.101

| poolend=192.6.11.254 netmask=255.255.255 gateway=192.6.11.100 leasetime=21600

=>dhcp server pool list
Pool

Start

End

Intf

State

0 LAN_Private

10.0.0.1

10.0.0.254

eth0

USED

1 My_Pool

192.6.11.101

192.6.11.254

eth0

USED

=>