Technicolor - Thomson ST585 V6 - Manual (Page 322)

E-DOC-CTC-20061027-0004 v1.0
Eth Commands
298
eth bridge vlan ifadd
Add a bridge interface to a VLAN.
SYNTAX:
where:
RELATED COMMANDS:
eth bridge vlan ifadd name =
intf =
[untagged = <{disabled | enabled}>]
name The VLAN name to which a bridge interface must be added. REQUIRED
intf The name of the bridge interface to be added to the VLAN. REQUIRED
untagged Enable or disable the interface as untagged for this VLAN.
The default is
disabled .
OPTIONAL
eth bridge vlan ifconfig Modify a bridge interface from a VLAN.
eth bridge vlan ifdelete Delete a bridge interface from a VLAN.
eth bridge vlan iflist Display all VLANs.