Technicolor - Thomson ST585 V6 - Manual (Page 382)

E-DOC-CTC-20061027-0004 v1.0
Firewall Commands
358
EXAMPLE:
=>firewall level list
Level Config
============
Active level: Disabled
nr name udptrack service readonly description
---------------------------------------------------------------------------------------------
-----
1
BlockAll strict disabled yes Use this Security Level to block all
traffic from and to the Internet.
2 Standard loose enabled yes Use this Security Level to allow all
outgoing connections and block all
incoming traffic. Services and
Application Sharing are allowed to open
pinholes in the firewall.
3 Disabled loose enabled yes Disabled the firewall. All traffic is
allowed to pass through your SpeedTouch.
4 Test strict disabled yes Another level in the firewall
=>firewall level modify name=Test udptrackmode=loose
=>firewall level list
Level Config
============
Active level: Disabled
nr name udptrack service readonly description
----------------------------------------------------------------------------------
1
BlockAll strict disabled yes Use this Security Level to block all
traffic from and to the Internet.
2 Standard loose enabled yes Use this Security Level to allow all
outgoing connections and block all
incoming traffic. Services and
Application Sharing are allowed to open
pinholes in the firewall.
3 Disabled loose enabled yes Disabled the firewall. All traffic is
allowed to pass through your SpeedTouch.
4 Test loose disabled yes Another level in the firewall
=>