Technicolor - Thomson ST585 V6 - Manual (Page 373)

E-DOC-CTC-20061027-0004 v1.0
Firewall Commands
349
firewall debug traceconfig
Configure the firewall trace options.
SYNTAX:
where:
EXAMPLE:
firewall debug traceconfig [tcpchecks = <{disabled | enabled}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled | enabled}>]
[sink = <{none | all | accept | deny | drop
| reset} or number>]
[forward = <{none | all | accept | deny | drop
reset} or number>]
[source = <{none | all | accept | deny | drop
| reset} or number>]
tcpchecks Disable or enable tcpchecks traces.
The default is
disabled .
OPTIONAL
udpchecks Disable or enable udpchecks traces.
The default is
disabled .
OPTIONAL
icmpchecks Disable or enable icmpchecks traces.
The default is
disabled .
OPTIONAL
sink Specify the action traced by the firewall for sink traffic.
The default is
none .
OPTIONAL
forward Specify the action traced by the firewall for forward traffic.
The default is
none .
OPTIONAL
source Specify the action traced by the firewall for source traffic.
The default is
none .
OPTIONAL
=>firewall debug traceconfig
Trace Config
============
tcpchecks
: disabled
icmpchecks : disabled
sink : none
forward : none
source : none
=>