Technicolor - Thomson ST585 V6 - Manual (Page 456)

E-DOC-CTC-20061027-0004 v1.0
IP Commands
432
ip config
Show/set global IP stack configuration options.
SYNTAX:
where:
ip config [forwarding = <{disabled | enabled}>]
[redirects = <{disabled | enabled}>]
[checkoptions = <{disabled|enabled|transparent}>]
[netbroadcasts = <{disabled | enabled}>]
[ttl = ]
[defragmode = <{disabled | enabled}>]
[addrcheck = <{off | own | static | dynamic}>]
[mssclamping = <{disabled | enabled}>]
[natloopback = <{disabled|enabled}>]
[loadbalancing = <{disabled|roundrobin}>]
[bitrate-window(sec) = ]
[acceleration = <{disabled|enabled}>]
forwarding Disable or enable the IP routing functionality.
The default is
enabled .
OPTIONAL
redirects Disable or enable the sending of ICMP redirect messages.
A router can send a redirect message in case a shorter path
than the path followed is discovered.
The default is
enabled (for security reasons).
OPTIONAL
checkoptions Disallow/Allow packets with IP options.
The default is
enabled .
OPTIONAL
netbroadcasts Disable or enable net directed broadcasts.
The default is
disabled .
In case netbroadcasts are allowed, no traces of
netbroadcasts are generated.
OPTIONAL
ttl A number between 0 and 255.
Represents the default Time To Live (TTL) for locally
generated IP packets. This parameter determines the number
of hop counts the IP packet may pass before it is dropped.
By limiting the TTL, continuous circulation of IP packets on
the network without ever reaching a destination is avoided.
The default is
64 .
OPTIONAL
defragmode Disallow (disabled) or allow (enabled) defragmenting IP
fragments.
The default is
enabled .
OPTIONAL