Technicolor - Thomson ST585 V6 - Manual (Page 675)

E-DOC-CTC-20061027-0004 v1.0
SNMP Commands
651
snmp community modify
Modify an SNMP community string to allow SNMP access over IP.
SYNTAX:
where:
snmp community modify securityname = <{RWCommunity | ROCommunity}>
communityname =
securityname Configure access rights/restrictions control for the community
name.
Choose between:
> RWCommunity : read/write access rights
> ROCommunity : read only access rights.
REQUIRED
communityname Configure the SNMP community name. REQUIRED