Eth bridge config, Eth commands, Syntax – Technicolor - Thomson ST585 V6 User Manual
Page 289: Example
E-DOC-CTC-20061027-0004 v1.0
Eth Commands
265
eth bridge config
Modify/display the bridge configuration settings.
SYNTAX:
where:
EXAMPLE:
eth bridge config
[brname = <{bridge}>]
[age =
[filter = <{no_WAN_broadcast | none}>]
[vlan = <{disabled | enabled}>]
[precedencemap =
brname
The name of a bridge instance
OPTIONAL
age
A number between 10 and 100000 (seconds).
Represents the lifetime of a dynamically learned Medium Access
Control (MAC) address.
The default is
300
.
OPTIONAL
filter
The bridge filter to be applied for all Wide Area Network (WAN)
bridge ports.
Choose between:
>
no_WAN_broadcast
: broadcasts from the Thomson ST itself
to the WAN are filtered out, broadcasts from the LAN to the
WAN are still passed through
>
none
: no broadcasts are filtered out.
The default is
no_WAN_broadcast
.
OPTIONAL
vlan
Enable or disable the use of the VLAN ID of the received VLAN
packets.
The default is
enabled
.
OPTIONAL
precedencemap
The IP QoS precedence mapping table
OPTIONAL
=>eth bridge config
Ageing : 300
Filter : no_WAN_broadcast
=>eth bridge config age=600
=>eth bridge config
Ageing : 600
Filter : no_WAN_broadcast
=>