Technicolor - Thomson ST585 V6 - Manual (Page 234)

E-DOC-CTC-20061027-0004 v1.0
DSD Commands
210
dsd config
Display/modify the Differentiated Service Delivery (DSD) framework configuration.
SYNTAX:
where:
EXAMPLE:
dsd config [state = <{disabled | enabled | automatic}>]
state Choose between:
>
automatic (default):
By default (DSD config state is automatic), the DSD framework is
not active, for example no URL filtering or web site filtering is
applied.
Only in case the state of the default WAN IP interface goes
down, DSD framework will be activated, for example in case the
PPP link goes down (implying HTTP intercept active).
>
enabled:
If DSD config state is enabled the DSD framework is
always active.
>
disabled
OPTIONAL
i
If you do not provide any parameters, the current configuration will be shown.
=>dsd config
State
: automatic
=>