Technicolor - Thomson ST585 V6 - Manual (Page 417)

E-DOC-CTC-20061027-0004 v1.0
IDS Commands
393
ids config
Display/modify the Intrusion Detection System (IDS) configuration.
SYNTAX:
where:
EXAMPLE:
ids config [state = <{disabled | enabled}>]
[trace = <{disabled|enabled}>]
state Enable or disable IDS checks.
The default is
enabled .
OPTIONAL
trace Enable or disable tracing.
The default is
disabled .
OPTIONAL
=>ids config
IDS configuration:
=================
state
: enabled
traces ::disabled
=>